Suspend.
Each package includes the motor, power cord and two 6 m mooring lines. Vertical suspension creates a roughly circular opening; angling the unit produces a longer opening.
Mooring lines included
Talk to an expert KASCO DE-ICERS / INSTALLATION
Orientation, depth and control work together. Plan your installation around the area you want to protect.
Each package includes the motor, power cord and two 6 m mooring lines. Vertical suspension creates a roughly circular opening; angling the unit produces a longer opening.
Mooring lines includedChoose a Universal Mount for adjustable angle and depth, using a customer-supplied nominal 25 mm pipe. The Industrial Mount uses a nominal 40 mm pipe and is designed for demanding conditions.
Mounts sold separatelyAsk your local distributor about temperature or timer controls compatible with your 230 V / 50 Hz unit. Have the complete installation checked by a qualified electrician.
Controls sold separatelyA BETTER START BELOW THE SURFACE
Kasco suggests approximately 1,2–1,8 m depth for vertical operation, slightly shallower when angled, and at least 0,31 m above the bottom. Water depth and unit placement are different measurements; follow the manual for your site.
View 50 Hz installation guidanceConsider ice expansion, lifting, pilings and boats.
Account for currents, obstructions and changing water levels.
Use the correct power supply and installation method for your model.
BEFORE YOU INSTALL
Start with the complete instructions for your model. These essentials are a quick reference, not a replacement for the manual.
Read the 50 Hz manual PDFHave a qualified electrician confirm the supply and suitable RCD protection in accordance with local electrical rules.
Never enter the water while equipment is connected. Disconnect power before servicing. Never run the unit out of water or lift it by its power cord.
Clearly identify the opening in the ice. Moving ice, extreme cold and shallow water can limit protection.
READY FOR THE SEASON